fracture surface
英 [ˈfræktʃə(r) ˈsɜːfɪs]
美 [ˈfræktʃər ˈsɜːrfɪs]
断裂表面
双语例句
- Fully considering the speciality of soil nailing, a rather precise method of stability analysis of soil nailing based on general fracture surface is presented.
充分地考虑土钉支护的特殊性，建立了一个比较精确的基于一般破裂面的土钉支护稳定性分析方法。 - Finally, microscopic holes are formed near the fracture surface, the morphology of which is changed with the increase of volume fraction of martensite.
微孔的形态随着马氏体的比率而变化，随着马氏体体积分数的升高，微孔形态从界面结合力的丧失转为微裂纹。 - When the shrinkage of the rod fracture surface much more than that of the cup part fracture surface, its formation by compound extrusion is not applicable.
当杆的断面收缩率比杯形部分断面收缩率大得较多时，不适合直接用复合挤压成形。 - The results showed that the weak interface can block the motion of the dislocations and change the propagation direction of the main crack, and result in forming lamella fracture surface.
结果表明，弱界面有阻碍位错运动、转主裂纹扩展方向的作用，可形成分层断口。 - The fracture mode and cause were analyzed and determined by fracture surface observation, metallurgical structure examination, chemical analysis and hardness testing.
通过断口宏微观观察、金相组织检查、化学成分及硬度检测等手段确定了叶片断裂性质和原因。 - Study on Relationship Between Impact Strength and Fracture Surface Fractal Dimension of PP/ Nano-CaCO_3 Composites
PP/纳米碳酸钙复合材料冲击强度与断口表面分维关系的研究 - The Application and Research of Three-dimensional Entity Modeling in Fracture Surface Survey
在三维实体模型基础上的断面测量软件研究 - Analysis and discussion of failure mechanism and fracture surface of slope under earthquake
地震边坡破坏机制及其破裂面的分析探讨 - Metallic materials-Determination of Charpy impact fracture surface
GB/T12778-1991金属夏比冲击断口测定方法 - The gravity fracture surface sliding model with self-affine fractal character is established.
构造了具有自仿射分形性质的重力型断裂面滑移模型； - The fracture surface of a failed injection valve nut of diesel engine high pressure oil pump was investigated by visual and SEM.
对断裂的汽车柴油机高压出油阀紧座的宏观、微观断口及显微组织进行了研究。 - The fracture surface of the wires studied by scanning electron microscopy ( SEM) shows a suitable interfacial bonding between the fiber and aluminum.
复合丝拉伸断口的扫描电镜（SEM）观察可见断面有一定起伏，部分纤维拔出但长度较短，表明纤维与基体具有适当的界面结合。 - A simple rock slope model is used to simulate the failure development process of the rock blocks due to the action of water pressure change along rock fracture surface.
对一个岩石边坡上的裂隙岩块随地下水上升而产生滑动破坏的过程进行了计算模拟，将此数值计算结果与岩块的滑动极限平衡计算结果作了比较分析。 - Quenching crack deep and long, straight fracture, fracture surface without oxide color.
淬火裂纹深而细长，断口平直，破断面无氧化色。 - In vertical wells, the included angle between the fracture surface and the current surface emitted by DLT ( dual laterolog tool) is equal to the inclination of the fracture surface.
在直井中，双侧向测井仪所发出的电流面与地层裂缝面之间的夹角，等于地层中裂缝面的倾角。 - Recognition and classification of metal fracture surface models based on Wavelet Transform
基于小波变换的金属断口模式识别与分类 - The adiabatic heating induces the temperature of fracture surface layer to be higher than the liquidus temperature too.
计算表明，断口表面层绝热升温温度依然高于液相线温度。 - The marks, microstructure, macro and micro fracture surface appearance of the11th order fan rotor blades was analyzed.
对风机第11级动叶片进行了痕迹、显微组织和断口宏微观分析。 - The fracture mode and cause of the pins was analyzed by fracture surface observation, chemical composition analysis, hardness testing, assembly flow analysis and mechanical calculation.
通过断口宏微观形貌观察、化学成分分析、硬度检测、装配生产流程分析及材料力学计算，确定了断裂性质和原因。 - The fracture surface traverses matrix as well as fibers and interface.
断裂表面横切过基体、纤维和界面。 - The Brittle-Ductile Transition and Impact Fracture Surface Morphology of HDPE/ E-TMB Blends and HDPE/ Elastomer Blends
HDPE/E-TMB共混物和HDPE/弹性体共混物的脆韧转变和断面形态 - Design and Construction Techniques of the Fracture Surface of the Leakage-proof Irrigation Canal of Small-size Rectangular On-spot Pouring Concrete
小型矩形现浇混凝土防渗渠道断面设计与施工技术研究 - This paper analysed the pattern and composition of residual metal in diamond fracture surface by ways of Scanning Electron Microscope ( SEM) and Energy Dispersion Spectrum ( EDS).
采用扫描电镜（SEM）和能谱（EDS）分析方法，分析了国内六种代表性的金刚石断面上残留触媒的形态及成分。 - The fractal character of the geologic fracture surface is studied.
研究了实地地质断裂面的分形性质； - Analysis of disqualification of tensile sample fracture surface of high strength ship plates steel and improvement measures
高强船板拉伸试样断口不合格的检验分析及改进措施 - The macrograph, micrograph and fracture surface of a failiure conduit of the primary reformer were analyzed with optical microscope and SEM.
用光学显微镜、扫描电镜对一段炉下集气管鼓胀破裂的导淋管的宏观、微观组织，断口形貌进行了分析。 - Quantitative Study of Macroscopical Metallic Fracture Surface Roughness
金属断口宏观形貌表面粗糙度的定量研究 - The dynamic character of gravity fracture surface sliding is considered and the stiffness criterion of fracture surface sliding is proposed.
研究了地质断裂面滑移的动力学行为，获得了断裂面滑移失稳的刚度准则。 - The SEM micrograph of fracture surface indicates that the fiber and the resin are evenly distributed, and the interface is bonded finely.
SEM断口形貌分析表明，树脂和纤维分布均匀，界面粘接良好。 - SEM analysis indicated that there was remarkable toughness fracture surface morphology for the epoxy resin system modified with ESBSVP.
SEM结果表明，经ESBSVP改性的环氧树脂体系断面呈现出明显的韧性断裂特征。